How to Unroot the LG Optimus 3D

With the availability of Stock ROMs in KDZ format, you can easily unroot any LG smartphone using the KDZ Updater. The thing becomes much easier when you’ve a CWM Flashable Stock ROM. The LG Optimus 3D Stock ROM is available in the CWM ZIP format and you can return to stock in no time. Here’s how you can unroot your LG Optimus 3D by installing the stock ROM on it.

I. Before You Begin:

1. You should have rooted your device using the guide given here.

2. You must have ClockworkMod Recovery installed on your device. We have a guide on how to install ClockworkMod Recovery on the LG Optimus 3D, you should check it out.

3. If you’re going to install the Gingerbread ZIP ROM, you need to follow the guide given here.

II. Downloading Required Files:

1. Stock ROM ZIP (Download link’s given in the first post, make sure to download the ZIP version)

2. Fastboot

III. Unrooting the LG Optimus 3D:

1. Download both the Stock ROM ZIP and Fastboot files to your Desktop.

2. Extract files from the Fastboot archive to your Desktop. You should get adb.exe along with some other files.

3. Connect your smartphone to your PC using the USB cable.

4. Copy the Stock ROM ZIP file from your Desktop over to the root folder of your device’s SD card.

5. After the file has been copied, disconnect the device from your PC.

6. Enable USB debugging on your device from Menu>>Settings>>Applications>>Development>>USB debugging.

7. Connect the device to your PC once again.

8. Open a Command Prompt Window on the Desktop of your PC. To do that, press and hold the Shift button on your keyboard and right-click on any empty area on the screen, then choose Open command window here.

9. Type in the following command into the Command Prompt Window:

adb reboot recovery

10. Your smartphone should reboot into the ClockworkMod Recovery mode.

Note: In the ClockworkMod Recovery Mode, you can use Volume UP and Volume DOWN buttons to navigate, Power button to make a selection.

11. When it enters the Recovery mode, choose install zip from sdcard>>choose zip from sdcard.

12. Navigate to the folder where you’ve put the Stock ROM ZIP file and select it for flashing using the Power button.

13. Since the file is a bit large, it should take some good time to finish.

14. As soon as the flashing is done, reboot your device by choosing reboot system now from the Recovery Menu.

15. And you’re all done!

Wonderful! Your device’s now back to the stock ROM that is not rooted. If you were going to the company shop for any warranty purpose, you can do that now!

If this procedure helped you please thank/donate to the original developers here.

If you need help with this procedure, please ask in the comments below or in the forum.

This is part of our Android How To’s. We have how to’s on rooting, loading ROMs, and tons of other tips and tricks for your specific device or for Android devices in general! For all of our Android How To’s, head here.

  • http://thedroidcity.com/ SHIV PATEL

    Thanks for detailed description …. :)

    • Mahesh Makvana

      You’re most welcome Shiv Patel !