How to Root the LG G Flex (All Carriers) (Video)

Rooting is the process of gaining administrative rights on your Android device.  Once we root our Android device, we can then make changes to it to customize it well beyond what it normally can do.

Once you have root access on your LG G Flex, you’ll be able to:

  • Remove apps that were preinstalled by your carrier/manufacturer from your device.
  • Free up storage space (because of the above benefit).
  • Increase battery life (apps that might have been running constantly can be removed).
  • Increase performance (after removing apps that are always running, the device will be less bogged down and run smoother).
  • Update to a new version of Android (by flashing a custom recovery/ROM, see the end of this procedure for more info on that).
  • Tons of other customizations when you use your new found administrative rights to flash a custom ROM (again, see the end of this procedure for more info on that).

Interested? Here’s how to root your LG G Flex:

I.  Before You Begin

1.  Make sure you have the necessary drivers installed before you start the procedure.

2.  Charge your device to 75% or more and back up everything important before you start.

3.  Following this procedure will void your warranty, so make up your mind that you really want to do this before proceeding.

4.  This procedure should work on the following variants of the G Flex – D955, D958, D959, F340 and LS995.  We currently don’t have a root solution for the AT&T D950 version but we’ll try to get a guide published as soon as it becomes available.

II.  Necessary Downloads

ioroot22.zip (Download link located at the end of the original post)

III.  Rooting the G Flex

1.  Enable USB debugging on your device.  To do this, go to Settings > Developer options and tick the USB debugging checkbox.  If you don’t see the Developer options section, go to Settings > About phone and keep tapping on the build number until you see the “you are now a developer” message.

2.  Connect your device to your Windows PC in Charging mode.  If there are any drivers being installed at this point, let them do so before continuing.

3.  Extract ioroot22.zip to a folder on your desktop for easy access.

4.  From the extracted folder, double-click on root.bat to begin the rooting process.

5.  Follow the on-screen instructions.

All set! Now, you can head to our How to Flash a Custom Recovery procedure for the LG G Flex (Coming ASAP, we’re waiting for someone to unlock the bootloader) to open up a whole new world of customizations for your Android device!

By the way, don’t be scared, you can always put your device back to stock by heading to our Rooting How To’s section, finding your device, and doing the How to Unroot listed for it there.

8 thoughts on “How to Root the LG G Flex (All Carriers) (Video)”

  1. Rubens Zanatta

    Thanks for the instructions, even though you didn’t mention here, it did work out perfectly on my D956 (the Brazillian Model, produced by ANATEL)
    Great post!

  2. this did not work for my lg g flex LS995, 4.4.2, failed to do the update from the APB and ioroot command prompt said “if failed then this version of ioroot does not support your hardware/firmware combo”

  3. I used this tutorial but after pressing enter for the second time on the cmd (After it gives you an example to change from MTP to charge and back again) then it shows a few warnings/precautions but at the top it says that my device is not found and that adbd cannot complete on production builds(Even though previously it says that it has found my phone), help?

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.