How to Root and Install ClockworkMod Recovery on Samsung Galaxy Ace Plus S7500
If you have a Samsung Galaxy Ace Plus S7500 smartphone, then you should root it to enjoy a bunch of new apps that work only on rooted phones. Here’s a guide showing you how you can root your Galaxy Ace Plus S7500 smartphone.
I. Before You Begin:
1. Warranty of the phone will be voided once it is rooted. If you need, then you can get back the warranty by installing either stock firmware or unrooting your phone.
2. Make sure your phone has at least 60% of battery life left to last through the process.
II. Downloading Required Files:
1. Download the ClockworkMod Recovery Image from here.
2. Download the Rooting Package from here.
3. Download the Odin Tool from here.
III. Installing ClockworkMod Recovery on your Galaxy Ace Plus:
1. Extract files from the Odin Tool archive and place them on your Desktop.
2. Double-click on Odin3 v1.85.exe file to launch the Odin Tool.
3. Turn OFF your smartphone using the Power key.
4. Put your phone into the download mode. To do that, press and hold Volume DOWN+Home+Power buttons together.
5. Connect your phone to your PC using the USB cable.
6. From the Odin Tool, click on PDA tab and select the CWM Recovery Image file for flashing.
7. Hit the Start button to commence the process.
After the recovery is successfully installed on your phone, it will reboot. Now, move on to the following procedure to root your phone.
IV. Rooting Galaxy Ace Plus:
1. Turn OFF your Galaxy Ace Plus smartphone.
2. Press and hold Volume UP+Volume DOWN+Home+Power buttons together to boot your phone into the recovery mode.
3. Connect your phone to your PC using the USB cable.
4. Extract files from the Rooting Package and place them on your Desktop.
5. Double-click the runme.bat file to start rooting your phone.
6. When the rooting is done, reboot your phone by choosing reboot system now from the recovery menu.
That’s it. You have successfully rooted as well as installed ClockworkMod Recovery on your Galaxy Ace Plus smartphone. Now, you have open gates to the world of custom ROMs and Root-only Apps.
If this procedure helped you, then please head over to the XDA Forum to thank/donate to the original developer of this root method !
Added!!
Added!!
Added!!
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
clockworkmod-5.0.2.8.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:14)..
Odin v.3 engine (ID:6)..
Odin v.3 engine (ID:3)..
Odin v.3 engine (ID:5)..
File analysis..
File analysis..
File analysis..
File analysis..
SetupConnection..
SetupConnection..
SetupConnection..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
recovery.img
NAND Write Start!!
RQT_CLOSE !!
RES OK !!
Completed..
Removed!!
Can’t open the serial(COM) port.
All threads completed. (succeed 1 / failed 3)
Removed!!
Removed!!
Removed!!
I got This and phone restarted And when I start a phone there is an exclamation yellow icon.. Where did I go wrong?
OOh! And It doesnt enter recovery mode.
please tell me how to restore factory settings ( unrooting) after rooting and installing ClockworkMod Recovery on Samsung Galaxy Ace Plus S7500
Are you talking about unrooting your phone? If so, then please head to the XDA thread and you’ll get the unrooting procedure there.
Thank you !
yo tengo el S7500L existe alguna diferencia o puedo usar los archivos para el S7500?
i never succes root my phone
fail in runme.bat
can anyone help me?
sorry bad english
Could you please tell us what error are you getting while running the batch file?
dude, it says that ur device was not found when i go for the last step i.e. rooting my phone!!
arjun, did you let your PC install the necessary drivers when you connected it in recovery mode? If you are running Windows 7, they should automatically install when you connect your device. Wait for it to finish and then click on runme.bat
My phone has CWM recovery mode as per instructions above. I turn on the phone in recovery mode and plug into the PC. PC finds the phone and informs me that the device is ready to use. I click on runme.bat, it goes through the motions, but each line declares that the file is not found, and nothing gets installed. What might be wrong?
Make sure that you’ve extracted all the files from the Rooting Package. The file “runme.bat” alone can’t root your device.
File Not Found error usually occurs when the required files are not present in the directory where you’ve RUNME.bat file.
But the File Not Found error comes even after having the required files.
You need to follow Dax’s suggestion, just install the necessary drivers and your phone should be recognized by your PC.
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
clockworkmod-5.0.2.8.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
All threads completed. (succeed 0 / failed 0)
whats the matter?
are you sure you are in recovery mode? if yes, then did you install all the necessary drivers?
When i started the ‘runme.bat’ file, it says:
The system cannot find the path specified…
What am i supposed to do??
what operating system are you using Shiyas?
The batch file works on Windows operating system only. If you’re using Linux or Mac, then it won’t work.
how to
unrooting??
and can i know where to get the stock firmware??
I cant get into recovery mode…when recovery mode opens it just blink and athe phonw will restart
flash the stock recovery using the same procedure as above and try if you can get in to recovery mode then. Then try flashing CWM recovery without missing any steps!
Did we must to instal some driver in windows first, before all of this?
Yes, you should first install the required drivers on your PC, so it can recognize your smartphone.
Can anyone tell me which drivers do I need to install in my Windows pc so that it can recognize my smartphone? I’ve installed CWM recovery manager, Also I’ve downloaded the Root.tar file. the only problem I’m facing right now is that whenever I connect my phone (recovery mode) to pc and double click on runme.bat file, it shows “Device not found” but still the process is over and I’m unable to root my phone. Please help.
You should check out the Official Website of Samsung to download the drivers for your smartphone. After downloading the drivers, install them on your Windows PC and your PC should detect your smartphone.
Hope it helps!
this work for the ace s5830?
my odin fail to install CWM in my ace plus and i can’t enter recovery mode… what should i do now?
Could you please tell us what error are you getting?
cool….thanks alot it worked for my galaxy ace plus…:)
That’s great! We’re glad it worked for you!!
Thanks shaddad!
My phone keeps on rebooting but nvr actually starts up……….. Plz help??
thank’s a lot for the info i will try this…
You’re most welcome!
Do let us know how it goes for you!
how do i know that rooting is completed?when i run the runme.bat file,it opens a black on which a lot of lines are written and in the it is written that press any key to continue.then i reboot but it reboots normally.. it doesnt have any superuser appp… nor is any dat deleted.its not rooted i thin
sorry super user app is installed but none of data is deleted and in superuser app.. every list is empty?.. how to upgrade and do other things
What are you trying to upgrade with Superuser?
Superuser is meant to provide root access to the apps that ask for it. It doesn’t do anything like upgrading, etc.
Hope it helps!
the root is complted successfully. but i was trying to do something in clockworkmod but it is stuck now.. i cant get out of clockworkmod.how to remove it.if i hace to install custom rom to remove it .. then how to install because if i connect the usb cable it doesnt connect because i cannot open my phone and select the option ‘connect to computer’.need help please! can you give the link for custom rom also.pleazzzzzzzzzz !
if i delete all data using clockworkmod recovery then… will the clockworkmod go?
Nop, the CWM Recovery should be intact and just the data you selected will be erased.
Thanks!
my samsung galaxy ACE plus is not reeboting after installing CWM recovery plz helllllp
My galaxy ACE plus in rebooting after installing CWM recovery plzzz hellllp
Hello! First: Thanks to provide this tutorial.
I’m afraid, I’m stuck in step 7 of the process of installing CMR. I’ve followed the instructions and now my phone is connected to the computer and says “Downloading… Do not turn off target !!”
In Odin I didn’t change any options, the options “Auto Reboot” and “F. Reset Time” are checked. I’ve chosen the file clockworkmod-5.0.2.8.tar.md5 in the PDA-section to download and hit the “Start” Button.
Then the first text field of the section “ID:COM” turned yellow and says “0:[COM3]”.
The message field says:
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
clockworkmod-5.0.2.8.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
All threads completed. (succeed 0 / failed 0)
Added!!
But nothing else happens. We’re waiting for the phone to reboot for several minutes now.
What can we do now? How long should we wait? Cancel and restart the process?
Ok, we tried again, now it seems to work! 🙂 Thanks 🙂
That’s great! Glad we could help you Moni!
It looks like you’ve to start everything from very beginning as the flashing part didn’t go well. As the commands say, 0 thread succeed, that means the file wasn’t flashed on the device.
Go back and start from the step-1.
Hope it should work fine then!
I get an error while i run the runme.bat file…bellow the lines, it’s written “error:device not found”. A little help please?
i’m gettin’ an error when i run the file runme.bat…bellow the lines it’s written “error:device not found”. A little help please?
Hey Tny,
You must have drivers for your device installed on your PC. “Device Not Found” usually indicates that you do NOT have proper drivers installed. You can head to your manufacturer’s website and download the drivers.
Hope it helps!
i got this when i run “runnme” :
— pushing busybox
4604 KB/s (1075144 bytes in 0.228s)
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— remounting /system
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— copying busybox to /system/xbin/
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting ownership
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— installing busybox
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— pushing SU binary
failed to copy ‘filessu’ to ‘/system/bin/su’: No such file or directory
— correcting ownership
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting symlinks
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— pushing Superuser app
failed to copy ‘filesSuperuser.apk’ to ‘/system/app/.’: No such file or directo
ry
ALL DONE!!!
Press any key to continue . . .
WHAT To DO
— pushing busybox
* daemon not running. starting it now *
* daemon started successfully *
failed to copy ‘filesbusybox’ to ‘/data/local/tmp/.’: Is a directory
— correcting permissions
chmod: /data/local/tmp/busybox: No such file or directory
— remounting /system
/sbin/sh: /data/local/tmp/busybox: not found
— copying busybox to /system/xbin/
dd: can’t open ‘/data/local/tmp/busybox’: No such file or directory
— correcting ownership
chown: /system/xbin/busybox: No such file or directory
— correcting permissions
chmod: /system/xbin/busybox: No such file or directory
— installing busybox
/sbin/sh: /system/xbin/busybox: not found
rm: can’t remove ‘/data/local/tmp/busybox’: No such file or directory
— pushing SU binary
1391 KB/s (22228 bytes in 0.015s)
— correcting ownership
— correcting permissions
— correcting symlinks
rm: can’t remove ‘/system/xbin/su’: No such file or directory
ln: /system/xbin/su: No such file or directory
— pushing Superuser app
failed to copy ‘filesSuperuser.apk’ to ‘/system/app/.’: Is a directory
ALL DONE!!!
Press any key to continue . . .
Worked like a charm 😛
Glad we could help you!
Stay tuned with us for more!
what are the facts i should know before i start this process……is there any way it can harm my mobile?
after i rooted my phone, i tried to install jellybean now my phone keeps restarting over and over help
hello but i have a massive issue with rooting my phone its form oz and it’s cwm is installing correctly but it’s not booting in to the program i’m holding all the buttons i need to down but it still won’t boot to it it just restarts it then stats the phone normally there any way around this ?? please help and thanks
If you’re having issues getting into Recovery mode, then simply download the Quick Boot app, install it and hit the Recovery button given inside.
Your device will instantly reboot into the Recovery mode.
Hope it helps!
How long does it take to install recovery ?? Coz for my phone its taking too much time.
plz reply if you really good at rooting
what i have to do about this ?? i’m sick of this..
— pushing busybox
4604 KB/s (1075144 bytes in 0.228s)
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— remounting /system
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— copying busybox to /system/xbin/
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting ownership
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— installing busybox
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— pushing SU binary
failed to copy ‘filessu’ to ‘/system/bin/su’: No such file or directory
— correcting ownership
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting permissions
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— correcting symlinks
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
– exec ‘/system/bin/sh’ failed: No such file or directory (2) –
— pushing Superuser app
failed to copy ‘filesSuperuser.apk’ to ‘/system/app/.’: No such file or directo
ry
ALL DONE!!!
Press any key to continue . . .
2 comments in the past similar to this are abandoned…
when i clicked on runme tha is showed system cannot find the path specified…….
please help me
Sidd, are you trying it on a Windows XP or older Windows PC? Did you tr this on Windows 7?
THIS IS THE CORECT ANSWER!!!!!
Step1:Mount /system
Step2:Start runme.bat
— pushing busybox
1976 KB/s (1075144 bytes in 0.531s)
— correcting permissions
— remounting /system
— copying busybox to /system/xbin/
2099+1 records in
2099+1 records out
1075144 bytes (1.0MB) copied, 0.114272 seconds, 9.0MB/s
— correcting ownership
— correcting permissions
— installing busybox
— pushing SU binary
1389 KB/s (22228 bytes in 0.015s)
— correcting ownership
— correcting permissions
— correcting symlinks
— pushing Superuser app
1888 KB/s (785801 bytes in 0.406s)
ALL DONE!!!
Press any key to continue . . .
works
Why i have already plugged in my device but this came out when run runme.bat what to do?
— pushing busybox
error: device not found
— correcting permissions
error: device not found
— remounting /system
error: device not found
— copying busybox to /system/xbin/
error: device not found
— correcting ownership
error: device not found
— correcting permissions
error: device not found
— installing busybox
error: device not found
error: device not found
— pushing SU binary
error: device not found
— correcting ownership
error: device not found
— correcting permissions
error: device not found
— correcting symlinks
error: device not found
error: device not found
— pushing Superuser app
error: device not found
ALL DONE!!!
Press any key to continue . . .
it appears that this guy did not explain properly enough to do this rooting.
you do need drivers from samsung on your desktop before you start and must be windows operating system.
not linux etc.
may i recommend you read up more on the subject before doing this to your phone
Hey guys, I was just wondering if there’s any alternative for 5.0.2.8 Cwm. Cause It had bug issue, like, After I rooted my device, I restarted it and I got stuck on the Cwm recovery menu, and can’t past through it, i managed it by updating it to 6.0.4.5, but now the problem is, I can’t go to the recovery menu, white screen comes out, but when i restart it, I could boot normally.
Please help guys.
My concern is, I would like to install a newer format of cwm that is compatible with ace plus, cause the 5.0.2.8, it just keeps going to the recovery menu, even though i reboot my phone.
I have a Problem , I flashed the ClockworkMod recovery and it all happened great then I tried to go to the recovery mode it blinks and disapear
then I made a factory reset
after that when I launch my phone it freezes on the recovery mode it never get’s into the phone
what can I do please help
Search our site for an Unroot procedure for your device, do it, and then do this procedure again. It should work.
Thanks!